MowRo: How To Replace The Mowro Button/LCD Cover?

Are you looking to replace the button/LCD cover on your MowRo robotic mower? Below are step-by-step instructions on how to remove and replace the cover.

Tools and Materials Needed:

• Replacement Button/LCD Cover
• Flat Head Screwdriver

Procedure

1. Using a flat head screwdriver, remove the cover by pushing the cover to the right side.
2. Put the screwdriver tip behind the cover's left side (where the hole is) and gently push the cover off with the screwdriver.
3. Once the left side is off, remove the right side by sliding off.
4. To put the new cover back on, start by sliding the hole over the notch on the right side.
5. Press the cover to the right side as far as possible.
6. Move the hole on the left side of the cover over the notch on the right side - it will slide through and your cover is now installed.